Loading...

HE Tool Head | 2.85 mm | Hardened Steel | 0.5 mm

Create strong parts with a presentation-ready finish with the LulzBot HE Tool Head. Built to handle the toughest industrial-strength materials, the HE Tool Head prints a wide range of materials from soft & flexible TPE to durable carbon fiber reinforced filaments.


Read more
Compatibility:
LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA
LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA

The LulzBot HE Tool Head features a genuine E3D Titan Aero Extruder/Hot End with a Hardened Steel 0.50 millimeter nozzle capable of printing high-strength composite polymers! This tool head is compatible with the LulzBot Mini 2, TAZ Workhorse and TAZ Pro 3D printers. LulzBot Mini 1, TAZ 5 & TAZ 6 users can add this tool head with the TAZ 5/6 Universal Tool Head Adapter and the Mini 1 Universal Tool Head Adapter.

A high-output centrifugal fan and quad-port cooling duct support elaborate prints with extensive bridging, cooling filament in 360-degrees before it has time to sag between points.

The Universal Mounting System makes swapping tool heads easy, you'll have the right tool head for the right job installed in minutes.

Parts Included

(1) LulzBot HE Tool Head | Hardened Steel | 0.5 mm (Fully Assembled)

(1) 3D Printed Wiper Mount

(5) Replacement Wiper Pads

 

 

Specifications

Spec Sheet

Layer Resolution: 0.4 mm - 0.6 mm (0.016 in - 0.024 in)

Filament Diameter: 2.85 mm

Nozzle Diameter: 0.5 mm

Nozzle Material: Hardened Steel

Extruder Hobb Material: Hardened Steel

Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

Extruder & Hot End: Genuine E3D Titan Aero

Maximum Extrusion Rate: Approximately 181 grams/hour | 40.38 mm³/s with PLA at 220°C

Supported Materials: Carbon-fiber filled Nylon, ABS, PETg, PLA, NinjaFlex TPU

Required power system: 24 Volts

Fans: (1) 5v 40 mm heat sink cooling fan, and (1) 360° print cooling fan

Maximum Extrusion Rate: Approximately 181 grams/hour | 40.38 mm³/s with PLA at 220°C (428°F)

Recommended filament diameter: 2.85 mm diameter (3 mm)

 

$ 349 00
349.0
Overview

PRODUCT ALERT 

Featuring a hardened steel nozzle and extruder hobb, this 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry.

Parts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).

HE Tool Head | 2.85 mm | Hardened Steel | 0.5 mm


$ 349 00
349.0

.
A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options