SE Tool Head | 2.85 mm | Single Extruder | 0.5 mm

Versatility and precision come standard with the LulzBot SE Tool Head, featuring the Universal Mounting System, and the industry leading Titan Aero Hot End and Extruder from E3D. This tried and true combination enables a vast palette of supported 3D printing material, both rigid and flexible. As the featured tool head on both the LulzBot Mini 2 and TAZ Workhorse 3D Printers, the SE tool head is here to bring even more performance and dependability to your already trusty LulzBot TAZ 6, TAZ 5, and LulzBot Mini 1.

Read more
LulzBot Mini v2.0, Boxed for Retail, NA
LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA
LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA
LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA
LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA

The LulzBot SE Tool Head features a genuine E3D Titan Aero Extruder/Hot End with a 0.50 millimeter nozzle enabling out of the box 3D printing with over 35 materials, including flexibles! This tool head is compatible with the LulzBot Mini 2, TAZ Workhorse and TAZ Pro 3D printers. LulzBot Mini 1, TAZ 5 & TAZ 6 users can add this tool head with the TAZ 5/6 Universal Tool Head Adapter and the Mini 1 Universal Tool Head Adapter.

A high-output centrifugal fan and quad-port cooling duct support elaborate prints with extensive bridging, cooling filament in 360-degrees before it has time to sag between points.

The Universal Mounting System makes swapping tool heads easy, you'll have the right tool head for the right job installed in minutes.

Parts Included

(1) LulzBot SE Tool Head | 0.5 mm (Fully Assembled)


Layer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)

Filament Diameter: 2.85 mm

Nozzle Diameter: 0.5 mm

Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

Hot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 73 seconds

Extruder & Hot End: Genuine E3D Titan Aero

Required power system: 24 Volts

Fans: (1) 5v 40 mm heat sink cooling fan, and (1) 360° print cooling fan

Recommended filament diameter: 2.85 mm diameter (3 mm)

Certified Open Source Hardware: US000138

$ 295 00


SE Tool Head | 2.85 mm | Single Extruder | 0.5 mm

$ 295 00

A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options